Support Hub/Troubleshooting/Why a Device Shows Offline: How the Status Is Decided
Fix

Why a Device Shows Offline: How the Status Is Decided

The Device Status page shows a device as online or offline. Knowing how that is decided makes problems easier to read.

How the status is decided

  • A connected device contacts Cams all the time.
  • If a device has not contacted Cams for more than 35 seconds, it is shown as offline.
  • The check runs every minute.

What this means for you

  • A short network blip can show up as offline and then come back online by itself. One short offline period is not a fault.
  • A device that stays offline is not reaching Cams. The cause is the device, the network, or the server settings on the device.

If a device stays offline

  1. Power: make sure the device is on and not restarting. See Fix repeated restarts.
  2. Cable or Wi-Fi: check the LAN cable, or the Wi-Fi name and password. See How to bring a biometric device online.
  3. IP address: if the device shows 0.0.0.0, it has no valid address. See DHCP on biometric devices.
  4. Server address and port: make sure they match what the setup guide lists. See Update the server settings.
  5. Firewall: allow the addresses listed in the setup guide.
  6. Your network or the device? Try the device on a different network. See Troubleshooting offline devices.

When the device is back online, punches it kept while offline are sent. See Punches made while a device was offline.

Still stuck? Email support@camsbiometrics.com with the device serial number and a short description of the problem.

Was this article helpful?